Device Overview
-
Appearance: Sleek, modern design for discreet use.
-
Functionality: Works with 510-thread cartridges.
-
Button Location: Discreet activation button.
-
LED Indicator: Displays battery status and voltage settings.
Powering On/Off
-
Turn On: Press the button 5 times rapidly to power on.
-
Turn Off: Press the button 5 times rapidly again to power off.
-
LED Indicator: Blinks to confirm power status.
Using a Cartridge
-
Attach a Cartridge: Securely screw a 510-thread cartridge onto the battery.
-
Activate Heating: Press and hold the button while inhaling.
-
Adjust Voltage Settings:
-
Press the button 3 times quickly to change voltage.
-
Green = 2.6v | Blue = 3.0v | Light Blue = 3.6v
-
-
Preheat Mode: Press the button 2 times quickly to activate preheat.
LED Indicator Guide
-
Low Battery: Red light blinks.
-
Charging: Solid blue light.
-
Fully Charged: Light turns off.
-
Preheat Mode: LED pulses.
Charging Basics
To charge your Wandjamin Cart Battery:
-
Connect the USB-C Cable – Plug the provided USB-C cable into the charging port at the bottom of the device.
-
Plug into a Power Source – Use a USB wall adapter, computer port, or power bank.
-
Monitor the LED Indicator – The LED will be solid blue while charging and turn off when fully charged.
-
Unplug When Done – Disconnect the charger once the battery is fully charged to prevent overcharging.
For detailed charging instructions, refer to the full charging guide here.
Safety & Maintenance
-
Keep Dry: Avoid water exposure to prevent damage.
-
Store Properly: Keep in a cool, dry place when not in use.
-
Use Correct Charger: Charge only with a USB-C cable to prevent overheating or short circuits.
-
Avoid Overuse: Do not use the device continuously for extended periods to prevent overheating.
-
Inspect Regularly: Check for any visible damage or irregular behavior.
For more comprehensive safety guidelines, refer to the full safety guide here.
Your Wandjamin Cart Battery is now ready for use! For troubleshooting, contact info@smylelabs.com.