How to Use the Raygun Cart Battery

The Raygun Cart Battery by Smyle™ Labs is a high-performance device designed for discreet and efficient use. This guide will walk you through the steps to operate your device.

Device Overview

• Appearance: Futuristic design with an ergonomic grip.

• Functionality: Works with 510-thread cartridges.

• Button Location: Conveniently placed activation button.

• LED Indicator: Displays battery status and voltage settings.

Inserting a Cartridge

For Most 1g Aroma Cartridges

Twist your aromatherapy cartridge directly onto the raygun. Then place the magnetic barrel over the aroma cartridge. We designed this raygun so that the tip is sticking out from the top for a better experience.

For 0.5g or Short Cartridges

First, twist on the included half-gram metal adapter onto the end of the raygun. Then twist your aromatherapy cartridge on top of the metal adapter. Finally, place the magnetic barrel over the cartridge.

For 2g, 3g, or Large Cartridges

First, twist on the long metal adapter directly onto the end of the raygun. Then place the magnetic barrel over the long metal adapter. Finally, twist on your aromatherapy cartridge on the very top. Note: Due to size, your cartridge will be on top of the raygun.

Powering On/Off

• Turn On: Press the activation button 5 times rapidly to power on.

• Turn Off: Press the activation button 5 times rapidly again to power off.

• LED Indicator: Blinks to confirm power status.

Using a Cartridge

1. Attach a Cartridge: Securely screw a 510-thread cartridge onto the battery.

2. Activate Heating: Press and hold the button while inhaling.

3. Adjust Voltage Settings:

   • Press the button 3 times quickly to change voltage.

   • The LED color will indicate the selected voltage level:

     • Green = 2.7V

     • Light Blue = 3.0V

     • Blue = 3.3V

     • Red = 3.7V

4. Preheat Mode: Press the button 2 times quickly to activate preheat.

5. Release your scented aroma into the air for two seconds maximum. Do not overheat the cartridge.

LED Indicator Guide

• Low Battery: Red light blinks.

• Charging: Solid blue light.

• Fully Charged: Light turns off.

• Preheat Mode: LED pulses.

Charging Basics

To charge your Raygun Cart Battery:

1. Connect the USB-C Cable – Plug the provided USB-C cable into the charging port at the top of the device.

2. Plug into a Power Source – Use a USB wall adapter, computer port, or power bank.

3. Monitor the LED Indicator – The LED will be solid blue while charging and turn off when fully charged.

4. Unplug When Done – Disconnect the charger once the battery is fully charged to prevent overcharging.

For detailed charging instructions, refer to the full charging guide.

Safety & Maintenance

• Keep Dry: Avoid water exposure to prevent damage.

• Store Properly: Keep in a cool, dry place when not in use.

• Use Recommended Charger: Charge only with a USB-C cable to prevent overheating or short circuits.

• Avoid Overuse: Allow the device to cool after prolonged use.

• Inspect Regularly: Check for any visible damage or irregular behavior.

For more comprehensive safety guidelines, refer to the full safety guide.

Your Raygun Cart Battery is now ready for use! For troubleshooting, contact info@smylelabs.com.