How to Use the Danksaber Cart Battery

  1. Overview
  2. Product Support
  3. Danksaber Battery
  4. How to Use the Danksaber Cart Battery

The Danksaber Cart Battery by Smyle™ Labs is a powerful, easy-to-use 510-thread battery. This guide will walk you through the steps to operate your device efficiently.

Device Overview

  • Appearance: Sleek saber-inspired design with an ergonomic grip.

  • Functionality: Compatible with 510-thread cartridges.

  • Button Location: Hidden activation button for seamless operation.

  • LED Indicator: Displays battery status and voltage settings.

Powering On/Off

  1. Turn On: Press the activation button 5 times rapidly to power on.

  2. Turn Off: Press the activation button 5 times rapidly again to power off.

  3. LED Indicator: Blinks to confirm power status.

Using a Cartridge

  1. Prepare the Cartridge: Place the included gold magnetic ring around the base of your 510-thread cartridge.

  2. Attach to Battery: Once the ring is secured, insert the cartridge into the battery—it will magnetically connect.

  3. Activate Heating: Press and hold the button while inhaling.

  4. Adjust Voltage Settings:

    • Press the button 3 times quickly to change voltage:

    • Green = 2.7v | Blue = 3.1v | Red = 3.6v

  5. Preheat Mode: Press the button 2 times quickly to activate preheat.

LED Indicator Guide

  • Low Battery: Red light blinks.

  • Charging: Pulsing red light.

  • Fully Charged: Light turns green

  • Preheat Mode: LED pulses.

Charging Basics

To charge your Danksaber Cart Battery:

  1. Connect the USB-C Cable – Plug the provided USB-C cable into the charging port at the bottom of the device.

  2. Plug into a Power Source – Use a USB wall adapter, computer port, or power bank.

  3. Monitor the LED Indicator – The LED will be pulsing red while charging and turn green when fully charged.

  4. Unplug When Done – Disconnect the charger once the battery is fully charged to prevent overcharging.

For detailed charging instructions, refer to the full charging guide here.

Safety & Maintenance

  • Keep Dry: Avoid water exposure to prevent damage.

  • Store Properly: Keep in a cool, dry place when not in use.

  • Use Recommended Charger: Charge only with a USB-C cable to prevent overheating or short circuits.

  • Avoid Overuse: Allow the device to cool after prolonged use.

  • Inspect Regularly: Check for any visible damage or irregular behavior.

For more comprehensive safety guidelines, refer to the full safety guide here.

Your Danksaber Cart Battery is now ready for use! For troubleshooting, contact info@smylelabs.com.

 

Was this article helpful?