The Gas Pump Fyre Torch Lighter by Smyle™ Labs is designed for precision heating with a unique gas pump-inspired design. This guide will walk you through refilling and using your torch safely and efficiently.
Refilling the Torch
Note: The Gas Pump Fyre Torch Lighter comes empty and does not include butane. You will need to purchase your own butane fuel before use.
Items Needed:
-
Gas Pump Fyre Torch Lighter
-
Butane Fuel (Triple-Refined Recommended)
-
Refill Nozzle Adapter (if necessary)
How to Refill:
-
Ensure the Torch is Off – Let the lighter cool down completely before refilling.
-
Locate the Refill Valve – Found at the bottom of the lighter.
-
Adjust the Flame Dial – Turn it to the lowest setting to prevent overflow.
-
Refill the Lighter:
-
Hold the butane canister upside down.
-
Insert the nozzle into the refill valve.
-
Press firmly for 3-5 seconds.
-
Repeat if necessary, but avoid overfilling.
-
-
Let the Gas Settle – Wait 3-5 minutes before using to allow the butane to stabilize.
-
Check for Leaks – If you hear hissing, let the lighter sit and ensure proper sealing.
Using the Torch
Igniting the Flame:
-
Turn On the Gas Flow – Adjust the flame control dial to your preferred setting.
-
Press the Ignition Button – Located on the front of the lighter.
-
Adjust Flame Height – Use the dial to increase or decrease the intensity.
-
Turn Off the Torch – Release the ignition button and turn the flame control dial to the lowest setting when finished.
Safety & Best Practices
-
Use Only High-Quality Butane – Low-quality fuel can clog the nozzle.
-
Avoid Overfilling – Excess butane can cause malfunction.
-
Store Upright – Keep in a cool, dry place away from direct sunlight.
-
Keep Away from Children – This is not a toy.
-
Do Not Inhale Butane – Always use in a well-ventilated area.
By following these steps, your Gas Pump Fyre Torch Lighter will remain reliable and efficient. For troubleshooting or support, contact info@smylelabs.com.